eo_logo
  • Country/Region
  • cart   
 
See all 5 Products in Family

6215H 5mm Mirrors XY Galvanometer Scanner, Protected Silver

62XXH Series XY Galvanometer Scanner, Protected Silver

62XXH Series XY Galvanometer Scanner, Protected Silver Tuning/Signal Monitoring Breakout Board for 6210H, #59-023 #88-170 Thermal Grease for Galvanometer Scanner, #59-024 +4
×
62XXH Series XY Galvanometer Scanner, Protected Silver
Stock #86-809 Clearance
×
£3,693.25
Qty 1+
£3,693.25
Volume Pricing
Request Quote
Type of Optics:
Mirror Size: 5mm Aperture
Coating:
1000Å Thick Low Pinhole, Protected Silver
Scan Angle (°):
±5 (Mechanical)
±10 (Optical)
Substrate: Many glass manufacturers offer the same material characteristics under different trade names. Learn More
Operating Temperature (°C):
0 to +50
Dimensions (inches):
2.24 x 2.18 x 2.18 (Mount)
Power Requirement:
±24 to ±28 V
Position Signal (V):
±10
Current - Peak (A):
Maximum: 20
Current - RMS (A):
Maximum: 4.1
Coil Resistance (Ω):
2.53
Rated Excursion, Rotor (°):
±20
Bumper Stop Angle, Initial Contact (°):
±26
Rotor Inertia (gm-cm2):
0.028
Torque Constant (dyne-cm/A):
37800
Coil Inductance (μH):
94
Back EMF Voltage (μV/°/s):
66
Power - RMS (W):
Maximum: 60
Damage Threshold, CW:
150 - 200 W/cm2
Step Response 0.1° (μs):
180
Step Response 10° (μs):
550
Power Supply:
Power Supply: 2 x #14-571 or 1 x #59-026
Power Supply Cable: #88-170

Regulatory Compliance

RoHS:

Product Family Description

  • Advanced Optical Position Detector Design
  • Moving Magnet Actuator Technology
  • Compact Size for Easy Integration

These galvanometers offer the highest positioning speed and precision accuracy than any compact, lower cost closed loop galvanometer available in today's market. The low inertia, high speed, high accuracy and compact size of these galvos make them suitable in applications ranging from biomedical systems, optical coherence tomography, laser projection, confocal microscopy and analytical instrumentation.

The dual axis servo driver provides optimal repeatability, linearity, stability and cost in a very compact package. An analog command input of up to ±10V DC results in ±5° mechanical degrees of scanner rotation. The error integrator in the servo loop enables microradian level position accuracy. The built-in system conditioning and position and velocity status monitoring make the integration of the driver board easy and accurate in complex scanning system applications. #59-021 and #59-874 include two galvanometers, a dual axis integrating servo driver amplifier, two interconnect cables, an XY galvo mount, and a 3mm aperture XY mirror set.

Note: It is strongly recommended that a heat sink be placed in contact with the servo driver board during operation. The thermal grease improves heat transfer between servo driver board and heat sink (not included). A positive and a negative power supply (not included) are required to operate the driver board. Choose Power Supply #66-911 (two required)

The dual axis servo driver provides optimal repeatability, linearity, stability, and cost in a very compact package. An analog command input of up to ±10V DC results in either ±5 (#86-609) or ±10 (#11-761) mechanical degrees of scanner rotation. The error integrator in the servo loop enables microradian level position accuracy. The built-in system conditioning and position and velocity status monitoring make the integration of the driver board easy and accurate in complex scanning system applications. It includes two galvanometers, a dual axis integrating servo driver amplifier, two interconnect cables, an XY galvo mount, and a 5mm or 10mm (specified in product description) aperture XY mirror set. Tuning/signal monitoring breakout board for 6215H (#88-156) provides access to all galvanometer and servo signals and #88-170 provides easy-to-use BNC input and crimp-pin terminated power/ground cables.

Note: It is strongly recommended that a heat sink be placed in contact with the servo driver board during operation. The thermal grease improves heat transfer between servo driver board and heat sink (not included). A positive and a negative power supply (not included) are required to operate the driver board. Choose either #14-571 (two required) or #59-026 (one required).

#86-809
#86-809
×