Each mount features high accuracy adjustment screws in either two (2) or three (3) screw versions for control of tip and tilt. Three screw versions allow additional translation in the optical axis.
The kinematic C-Mount positioners have 1"-32 TPI female threading to hold C-Mount components. The kinematic T-Mount positioners have M42 x 0.75 threading to hold T-Mount components. The kinematic S-Mount positioners have M12 x 0.5 threading to hold S-Mount components. All three mounts use fine adjustment, 100+ TPI, screws to provide ±5° of tip/tilt.
Construction materials ensure quality and repeatability. Stainless steel inserts are used for all adjustment screw contact surfaces and specially designed dampening grease provides smooth movement. Adjustment knobs are removable for Allen Key or motorized adjustment (2mm key size). Included hardware kit contains post-mounting screws and Allen wrenches for adjustment.
These mounts are designed to connect to our TECHSPEC® Metric Stainless Steel Mounting Posts. For C-Mount and T-Mount types, when the male-thread adapter is removed from the post, either an M4 or 8-32 tapped hole is available to accept the post-mounting screw from the mount. For the S-Mount types, an M4 hole is available for mounting.
TECHSPEC® Optical Mount Accessories are available to easily integrate TECHSPEC® Kinematic C-Thread, T-Thread, and S-Thread Optical Mounts into a variety of application setups.